2059NTX Repair Tips
Search: 2059NTX
Results 11
Results 11
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Bush | 2059NTX | Dead, stand-by light on | All power supply voltages OK. no drive to line output. IC102 faulty TDA4505E | ||
Bush | Onwa 2059NTX | Pic size varies with brightness after psu repair | Check 0R68 resistors for rise in value | ||
Bush | 2059NTX | Wont sw to st/by | Q907 2SC2335 | ||
Bush | 2059NTX | Trips | No 17v o/p from psu sec - 6R8 surge lim res o/c | ||
Bush | 2059NTX | St/by only | R120 (100K ) power unit O/C | ||
Bush | 2059NTX | Patterning when cold - possibly with no col | C125 100mfd 16v between IC103 & IC101 near front of pcb | ||
Bush | 2059NTX | No sound or raster - HT line Ok. | R919 ( 0.68ohm ) fusible o/c. | ||
Bush | 2059NTX | No raster, no sound, EHT 32KV | C910 10uF, C909 47uF, R422 3R3 2w, ZD402 12 volt zener and R423 .68ohm | ||
Bush | 2059NTX | If standby selected pic becomes dark & sound mutes | Q907 ( 2SC2335 ) | ||
Bush | 2059NTX | Height fluctuates/reduces & NICAM sound dropout | 18v supply low at 11v due to R919 1R high res | ||
Bush | 2059NTX | Dead - HT present | R919 0R68 o/c in LT supply |